PLACLEAN series, wiping agents for degreasing, antistatic effect, and removing of mold releasing agents

なし

Contents

1. Introduction
- 1.1. Advantages of PLACLEAN series
2. How to use
3. General characteristics
4. Related articles

Introduction

PLACLEAN series can remove mold release agent, oil, hand oil, etc. which is difficult to remove by IPA, etc.
By preventing electrification of the resin base material, it is possible to reduce the adhesion of dust and particles.

Advantages of PLACLEAN series

	Contains no surfactants or other non-volatile components It is possible to eliminate the source of coating defects such as blisters. Blister is a phenomenon in which a portion of the paint film peels off from the substrate or base, causing the paint film to appear swollen and blister-like.
	Contains no highly toxic ingredients It does not contain highly toxic ingredients such as IPA and toluene.

How to use

Put PLACLEAN series in a container.
Impregnate the wiping cloth with PLACLEAN series, and squeeze the wiping cloth off by hand.
Wipe the surface of the resin product before painting with a squeezed wiping cloth.

* The usage depends on the coating conditions and the contamination of the workpiece.
* Since the cloth after wiping is contaminated, wiping with a clean cloth surface always prevents reattaching the contamination to the workpiece.

General characteristics

	PLACLEAN WS-1401U	PLACLEAN WS-1407U	PLACLEAN WS-6000U
Feature	For general use	IPA substitute, fast drying	Low VOC
Main component	Hydrocarbon / alcohol	Alcohol	Alcohol
Boiling point	97℃	78℃	78℃
Flash point	-7℃	16℃	25℃
Water-solubility	Difficulty	Easy	Easy
Surface tension	20 dyn/cm	22 dyn/cm	23 dyn/cm
Wettability (PP)	○	◎	○
VOC components	99％	100％	59％
Target resin	PP、 urethane	PP, urethane, ABS	PP, urethane, ABS
Packaging	13 kg/can	14 kg/can	16 kg/can

	Trouble solution Troubleshooting for Painting process ~HAJIKI (cissing)~ HAJIKI (cissing) is a phenomenon in which a flowable paint comes into contact with a factor substance having a lower surface tension than that of the paint, and the factor substance spreads by being pulled by the paint, and the film thickness of the part becomes thinner.
	Trouble solution Troubleshooting for Painting process ~BUTSU~ Defects due to particles tend to be more serious due to paint-induced particles, dust, fiber scraps, insects, other minute materials and also due to electrostatic adsorption due to static electricity. Therefore, it is necessary to grasp and observe the conditions of the surrounding environment in order to solve these problems.

Tags: deglease, IPA alternative

お問い合わせ

SDSの送付依頼はこちらから

日本国外の方は英語ページでお問い合わせください。
お問い合わせいただくにあたって、下記の項目を正確にご記入下さい。
お問合せ内容によっては、ご返事を差し上げるのにお時間をいただくこともございます。
※お問い合わせフォームからのセールス等は固くお断りいたします。送信いただいても対応いたしかねます。